No one wants to face a lot of dirty dishes or a sink full of dirty pans, pots, bowls and other kitchen utensils. Washing the dishes will need a lot of time, and some instances require a deep cleaning using different dish detergents to remove the grease and odor. Thankfully, dishwasher appliances are now available in the market, and it is great to help many homes.
To keep the dishwasher in good working condition, it is vital to know the Dishwasher cleaning instruction to ensure that it is handled well. A well-maintained dishwasher can prevent costly repairs and prolong its lifespan. On the other hand, even if the dishwasher is maintained, it can still be prone to issues that need dishwasher repair services from the GE Monogram repair expert in Santa Ana to diagnose and fix the problem with the machine.
A problem with the dishwasher can be due to different factors. There are instances where the problem is with the faulty parts that need a replacement to fix the problem. One of the issues you might face with your dishwasher is when it doesn’t drain the used water or after the cycle. Normally, the wastewater will be removed after the cycle is done by pumping it through the drain hose and out into the sink drain. It is normal to see a small amount of water left at the bottom of the machine. But, if you begin to see a cup or more of standing water, this means a problem.
Drain Pipe and Garbage Disposal
- Before checking the dishwasher components, check the pipe the dishwasher drains into is not clogged. If the dishwasher is connected to the garbage disposal, make it free from debris.
Air Gap and High Loop
- If the dishwasher drain hose is not connected to the garbage disposal, it may connect to an air gap. If you do not have an air gap, you may position the drain hose in the high loop underneath the sink. The air gap and the high loop are designed to stop the wastewater from flowing back into the dishwasher during the cycle.
Filter and Sump
- Depending on the dishwasher model, you may have a removable filter in your GE Monogram dishwasher. Removing the filter allows you to clear the drain pump from any debris that can cause clogging. If the filter is removed, clean it using warm water and spa and make sure all debris is removed.
- If the dishwasher cannot drain, it may be due to the drain hose that might be kinked or blocked. Check first if the drain hose is kinked. If it is not kinked, check if the drain hose is blocked.
- If the drain hose or the filter is not blocked and the drain hose is properly connected, the dishwasher might have a faulty drain pump.
- The drain solenoid opens the drain valve, allowing the water to drain from the dishwasher. The valve will not open, and the dishwasher won’t drain as it becomes defective.